Article ID : 00180418 / Last Modified : 24/07/2017

Windows 7 Compatibility Chart For MICROMV Camcorder

    The following tables show you the result of compatibility tests of each product with Windows 7.
    About the applicable environments:

    • Windows 7 needs to be preinstalled at the factory.
    • Environments upgraded from other OS are not supported.
    • Operations are not guaranteed in all computers.

    Note: 

    • The USB streaming function is not supported unless otherwise specified.
    • i.LINK connectivity is tested with Windows Movie Maker.

    Legend:
    O : Compatible
    X : Not compatible
    - : Not applicable

    USB (Memory Stick)

    i.LINK

    Model

    64-bit

    32-bit

    64-bit

    32-bit

    DCR-IP1/E O O O*8 O*8
    DCR-IP210/E O O O*8 O*8
    DCR-IP220/E O O O*8 O*8
    DCR-IP45/E O O O*8 O*8
    DCR-IP5/E - - O*8 O*8
    DCR-IP55/E O O O*8 O*8
    DCR-IP7/E/BT X X O*8 O*8

    *8 The supplied software (MovieShaker Ver.3.1 for MICROMV) is not compatible with Windows 7.
    When using Movie Maker,
    - You cannot write back to a tape.
    - 16:9 scenes will be 4:3 (vertically stretched).
    - You cannot partly import movies from a tape (only entire movies can be imported).

     

    The following table shows you the result of compatibility tests of each software with Windows 7. About the applicable environments:
    • Windows 7 needs to be preinstalled at the factory.
    • Environments upgraded from other OS are not supported.
    • Operations are not guaranteed in all computers.
    Note:
    • Starter Edition of Windows 7 is not supported unless otherwise specified.
    • With 64-bit editions, the software works in the 32-bit compatibility mode.

    Software

    Compatibility 

    64-bit

    32-bit 

    MovieShaker Ver.3.1 for MICROMV No

    Last Updated 14th October 2009