CLASS D MONO AMPLIFIER

Full Specifications & Features

XM-GTR3301D

Size & Weight

Dimensions (W x H x D)
35.7 x 5.5 x 27.7
Weight
2.9

Amplifier

Channel Configuration
1ch (Mono)
Low Pass Filter
50-300Hz
Low Pass Filter Slope
12dB/oct

Rated Output Power, RMS 20 - 20000 Hz

Max. Channel Configuration at 4 ohm (W) / THD (%)
330W x 1 / 1.0% (20-200Hz)
Max. Channel Configuration at 2 ohm (W) / THD (%)
600W x 1 / 1.0% (50Hz)

Maximum Output Power (1 kHz)

Max. Channel Power Configuration at 4 ohm
600W x 1
Max. Channel Power Configuration at 2 ohms
1100W x 1

General Features

Frequency Response
10-300Hz
Tolerance
+0.5/-3dB
Signal to Noise Ratio
100dB
Total Harmonic Distortion at 1 kHz (%)
0.1% (50Hz)

Details

CEA Power output
330W x 1
CEA SN Ratio
65dBA
Load Capability (ohm)
- / YES
MOSFET
YES / YES
Subsonic High Pass Filter 
6-70Hz (Variable),12dB/oct
Bass Boost: Frequency (0 - 10 dB)
40Hz
Speaker Level Input
YES
Line In: Input Sensitivity
0.3-6
Gold Plated Connectors
YES
Current drain (A) - rated output power at 4 ohm
30A
Line Out
YES (Through)
Balanced Input Circuit
YES

Features

A more efficient way to amplify your music

The GT3301D has been rated a Class D amplifier, converting 90% of incoming power into speaker output – around 30% more than most conventional amplifiers. As a result, the amplifier is able to deliver incredible power without generating large amounts of heat.

Dynamic Distortion Suppressor™

Distortion can occur when an amp is driven too hard, with your audio’s signal peaks being abruptly clipped. The GT3301D’s Dynamic Distortion Suppressor™ reduces signal peaks without clipping them harshly, substantially reducing the levels of distortion.

Active Thermal Control

High temperatures can have a negative effect on amplifier components, often causing the amp to shut down until it returns to a cooler temperature. Active Thermal Control automatically manages the amp’s output, so you won’t need to worry about your music cutting out – even with prolonged use.

Low Pass Filter

The single-channel GTR3301D is designed for maximum performance with subwoofers. The variable low pass filter (50-300Hz) lets you tune the amp for deep bass and the perfect integration with the rest of your system.

Flexible mounting options

The amp’s single-sided connections provide flexible installation and multiple mounting options.

High-Level Input

No pre-amp outputs? No problem. If your speaker system doesn’t have pre-amp outputs, simply connect your receiver’s outputs to the amp’s high-level inputs and you’re ready to go. Thanks to built-in auto sensing technology, the amp will automatically engage whenever the head unit is switched on.