Car Audio

Car Audio

Test Title
XS-W104GS | 25 cm (10“) Subwoofer



Powerful low end for your ride


Meet our XS-W104GS 25 cm (10") subwoofer with 350W CTA RMS power handling. A diaphragm directly connected to the voice coil, together with the foam rubber surround, offers tight and deep bass, while the long excursion design delivers rich tones for every journey.

  • XS-W104GS

    (NZD inc. GST)

 Front on image of the XS-W104GS speaker

Light-weight cone diaphragm with polypropylene cap

A light-weight cone diaphragm directly connected to the voice coil reproduces tight low end. The injected polypropylene dust cap ensures rigidity and optimises internal damping, realising powerful and responsive bass sound.

 Close up of the rubber surround for the XS-W104GS speaker

Rubber surround

A rubber surround reduces excessive vibration and supports cone excursion with less distortion. The result is a solid bass response at high volume levels so that your system can play loud and clear.

 Image of the progressive height rate double spider of the XS-W104GS speaker

Progressive height rate double spider

The acoustically-optimised spider allows for higher power handling and airflow, with a profile designed for more rapid and precise cushioning of the speaker cone. To increase signal integrity and prevent sound interference the lead wire from the voice coil is also sewn to the spider, reducing wire movement.

 Diagram highlighting the long excursion structure within the XS-W104GS speaker

Long excursion structure

The voice coil is supported by the double-layered spider, suppressing unwanted rolling, while also ensuring long excursion to reproduce rich bass sounds.

 Image comparing previous and current packaging with colour drops and -90% text on the left

Environment in mind

Our products are not only designed to be stylish but also with the environment in mind. For the individual packaging of the XS-W104GS, 98% of the cushions are made of paper materials, and compared to the prior model, printed information has been carefully considered for simplicity and length to reduce printer ink usage by approximately 90%, reflecting Sony’s commitment to reducing environmental impact.

25 cm (10") light-weight cone diaphragm with polypropylene cap

Progressive height rate double spider for high power handling

1500­W peak / 300­W rated / 350W CTA RMS power handling

Frequency response: 35 Hz – 500 kHz

Sensitivity: 88 dB (1W / 1 m)